61. Which method of cleaning you will use to remove oil, grease and paint from the surface of the metals to be welded?
A. filing
B. wire brushing
C. washing with cold water
D. using solvents of diluted hydrochloric acid
62. In the electrode coding ER4211, the third digit of the number 4211 indicates….
A. welding current and voltage condition
B. elongation and impact properties
C. tensile strength of the joint
D. welding position
63. A long arc is used in…
A. welding with a low hydrogen electrode
B. horizontal position
C. plug or slot welding
D. cast iron welding
64. If the travel speed of electrode is high, which type of weld defect you will get on a T fillet joint?
A. overlap
B. slag inclusion
C. excessive reinforcement
D. lack of root penetration